|
Used to ensure water tightness in the passage through the roof. It also protects the rubberised flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness. APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances. CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.
Distance to combustibles is 60mm. APPROVALS
KC is HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600 N1 D V2 L50040 G60. INSTALLATION
It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness. |
