The Adaptor is used to connect Ř150mm Black Stove Pipe, Vitreous Enamel or 1mm Stainless Steel Single Wall Pipe to Ř150mm KC Twin Wall Insulated Chimney.
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.
Distance to combustibles is 60mm.
KC is HETAS Approved and is CE marked.
EN1856-1 T600 N1 D V2 L50040 G60.
This adaptor is used to connect to either Vitreous enamel or single wall flue our twin wall insulated flue, when fitting you should make joint good with fire cement
KC Twin Wall Insulated Chimney parts are secured togrther by using a Locking Band.
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).