APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.
Distance to combustibles is 60mm.

APPROVALS
KC is HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600 N1 D V2 L50040 G60.

INSTALLATION
This adaptor is used to connect to either Vitreous enamel or single wall flue our twin wall insulated flue, when fitting you should make joint good with fire cement
DT Twin Wall Insulated Chimney has a simple twist fit joint system, this is then secured by using a Locking Band - the simplest and strongest construction system on the market today.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board). This distance is only for DT, other flues on the market may have distance of 60mm or more (this is because of the quality of the product) – please ask your supplier.